BitaTek Cyclops 1D, Руководство по настройкам

Страница: 12 / 75

BlueTooth Scanner Setting Guide
12
5.2. Data transfer via Bluetooth Under Batch mode
The customer can get the data that be saved under Batch mode by Bluetooth
。
The BTS600
must change to Bluetooth data transfer mode, you can reference the
「
5.3 SPP
communication
」
Item Description
How to transfer the
data Two method of transfer
Press Key
（
Scan Key + Fn Key
）
Scan the “
BT data transmission mode change
” configuration
barcode (A033)
5.3. SPP Communication
This section is about the SPP communication
The BTS600 will execute the handshake with host device ( ex. PC, iPhone, iPad or Android
smart phone ) according the setting of BTS600 configuration under SPP communication. So
the customer must install an application on the host device to handle the communication
handshake with BTS600.
The follow table is for customer application reference.
Master mode BTS600(This Device) send out the paring request to host device.
Please reference “
The setting barcode about physical address of
Bluetooth module
”
The Bluetooth physical address of Host device only 12 digital.
Slave mode The host device sent out the paring request to BTS600.
Please reference “
The Setting barcode about Device Name of BTS600
”
The BT manger application of host device select the BTS600 device name
※
If BTS600 want connect with the BT dongle of PC or NB, the dongle must lately of BT
version 2.0.
5.3.1. SPP Transfer Data format
The Bluetooth communication of SPP mode is simulate the communication of virtual serial