w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
15
M
aintenance and care
cleaning the upper tank
1.
Grasp the inner cyclone and twist to the left
until the locking tabs stop the rotation. Pull
down from the upper tank to remove it.
2.
Wipe out the inside of the upper tank
and the inner cyclone with a damp cloth
moistened with water or a mild cleaning
solution.
3.
If you desire to thoroughly clean the filtra-
tion disk located in the upper portion of
the inner cyclone, hold the bottom of the
cyclone and turn filtration disk to the right
and pull up to remove.
4.
The inner cyclone and filtration disk may
be washed using a mild detergent. Be
sure it is completely dry before reassem-
bling or damage to your unit may result.
5.
Once cleaning is completed, reassemble
the filtration disk over the inner cyclone by
sliding it straight down on the top of the
inner cyclone and turning left. Be sure to
line up the tabs when reassembling for
proper installation.
6.
To replace the inner cyclone, slide it into
the upper housing. Be sure to line up the
inner cyclone by ensuring tabs on filtration
disk are positioned toward the front of the
unit. Push the inner cyclone in and rotate
it to the right until the locking tabs stop the
rotation.
1.
3.
5.
6.
