w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
13
M
aintenance and care
Replace light bulb
1.
Unplug the vacuum from electrical outlet.
2.
Using a screwdriver, first remove 2 screws
on either side of lens and pull out to
remove the lens.
3.
Remove the bulb from the socket by
grasping the bulb and pulling gently.
Install the new bulb by pushing it gently
into the socket until the bulb snaps into
place.
4.
Reposition the lens, place cover back over
headlight and reinsert 2 screws.
turbobrush maintenance
the turbobrush should be checked
regularly for clogs or debris wrapping
around the brush.
1.
Remove tool from hose or front of vacuum.
2.
Twist collar so opening is at the top and
lift top cover to remove.
3.
Remove the brush from the belt and clean
debris.
4.
Replace the brush inside the belt and
place ends into slots on sides as shown.
5.
Reposition top cover making sure to line
up inside tab at the front with the opening
on the cover. Twist collar until opening is
at the bottom to lock into place.
2.
3.
4.
2.
4.
5.
