background image

   

   www.BISSELL.com

5

Your deep cleaner comes in four easy-to- 

assemble components:

 

Upper Handle with Screws 

 

Lower Base 

 

Upper Hose/Cord Rack 

 

Lower Hose/Cord Rack 

The only tool you will need to assemble your 

cleaner is a Phillips head screwdriver.

1.

 Slide upper handle onto lower base and secure 

with two long screws into marked holes (screws 

will be taped to upper handle).

2.

 Attach upper hose/cord rack to back of  

the handle by guiding hook up into the slot  

location and pressing firmly upward until it  

is seated flush with back of machine. Secure  

1 short screw through hole in the bottom of 

upper hose/cord rack.

3.

 Attach lower hose/cord rack by guiding the 

hook up into slot location and pressing firmly 

upward until it is seated flush with back of 

machine. Secure 2 short screws through holes  

on sides of the bottom hose/cord rack.  

4.

 Wrap hose around lower and upper hose/cord 

racks and secure it by inserting trigger on hose 

grip into opening on hose grip holder located on 

upper hose/cord rack.

NOTE: Make sure to wrap hose beginning  

from back of bottom hose/cord rack and  

then wrapping over and around top of upper 

hose/cord rack.

5.

 Wrap cord around lower and upper hose/cord 

racks and secure plug to cord with clip on plug.

6.

 Attach cleaning tools as necessary to stor-

age locations on the front upper handle, bottom 

hose/cord wrap and end of hose grip.
Deep cleaner assembly is now complete.

Cleaning fluid

Keep plenty of genuine BISSELL 2X formula on 

hand so you can clean and protect whenever it 

fits your schedule. Always use genuine BISSELL 

deep cleaning formulas. Non-BISSELL  

cleaning solutions may harm the machine and 

will void the guarantee.

Assembly

2.

3.

4.

1.

22oz.  
Stain  
Pretreat

#1147E

24oz. 2X Wash
& Refresh Natural 
Orange Formula

#83P3E

24oz. 2X Wash & 
Protect PET Pet Stain  
& Odour Formula  
w/ Scotchgard

Protector 

#99K5E

24oz. 2X Wash 
& Protect PRO 
Professional  
Stain & Odour  
Formula w/  
Scotchgard

 Protector

#78H6E

24oz. 2X Wash  
& Protect Stain  
& Odour Formula  
w/ Scotchgard

Protector 

#62E5E

24oz. 2X Wash & 
Refresh Blossom & 
Breeze Fragrance 
Formula w/  
Febreze® Freshness 

#1248E

24oz. 2X Wash & 
Refresh Cotton  
Fresh Formula w/  
Febreze® Freshness 

#1249E

WARNING

To reduce the risk of fire and electric shock due to internal 

component damage, use only BISSELL cleaning fluids 

intended for use with the deep cleaner. 

WARNING

Do not plug in your deep cleaner until you have completely 

assembled it per the instructions and are familiar with all 

instructions and operating procedures.

16 oz. 2X Wash  
& Shine Hard  
Floor Solutions

#56L9E

Содержание POWERBRUSH PREMIER 1466F

















Отзывы: