Operations
Empty the 2-in-1 water tank/
clean removable nozzle
1.
Press power pedal
off. Remove 2-in-1 water
tank from base using tank carry handle. Carry
tank like a bucket to a utility sink or outside
where you will dispose of dirty water.
2.
Pull upward on bottom edge of latch in the
back of tank to unhook and remove lid.
3.
Empty dirty water from back corner of tank.
4.
After each use, remove any debris trapped
in red lint screen on base of machine while tank
is still removed.
5.
After each use, remove nozzle by grasping
each side of top of nozzle and pulling forward.
Clean nozzle by rinsing under running water.
6.
When finished, replace nozzle by slightly
raising front of machine to line up slots on
each side of the base with hooks on each side
of nozzle. Attach at base first and then push
forward to click nozzle into place.
NOTE: If nozzle is not attached properly, loss
of suction will occur.
7.
To continue carpet cleaning, refer back to
“Carpet cleaning” instructions on page 7.
If cleaning is complete, refer to “Maintenance
and care” section starting on page 10.
Ready Tools™
Your deep cleaner comes equipped with a hose
and at least one cleaning tool for cleaning stairs,
upholstery, and more.
Important! If using to clean upholstery,
check upholstery tags.
1.
Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can use
your deep cleaner. If tag is coded with “X” or
“S” (with a diagonal strike through), or says
“Dry Clean Only,” do not proceed with any deep
cleaning machine. Do not use on velvet or silk.
If manufacturer’s tag is missing or not coded,
check with your furniture dealer.
2.
To begin cleaning with attachments, follow
instructions on page 7 for filling 2-in-1 water tank.
3.
Set ReadyTools dial to TOOLS setting. This
will allow spray and suction from hose.
4.
Attach cleaning tool of your choice to end
of hose.
NOTE: If your deep cleaner came with a Deep
Reach Tough Stain Tool, do not follow the
cleaning tool instructions below. Instead,
follow the “Cleaning with Deep Reach Tough
Stain Tool” instructions in the next section.
www.BISSELL.com
8
3.
4.
1.
Lint Screen
5.
Adsdfdd ghg bvh
cvbbj jkn hnbj jkvh
gcghhjj jhf
fhl kllgh
Manufacturer’s tag
3.
6.
IMPORTANT
Check for colourfastness in an inconspicuous place. If
possible, check upholstery stuffing. Coloured stuffing
may bleed through fabric when it becomes wet.
WARNING
To reduce the risk of electric shock, push power button
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Содержание POWERBRUSH PREMIER 1466F
Страница 1: ...POWERBRUSH PREMIER USER GUIDE MODEL 1466F ...
