INSTALLATION, OPERATION AND MAINTENANCE MANUAL
BiSolid Comfort OM-BSCV00/08/2012/EN
6
harmful emissions released into the atmosphere. The boilers are designed for heating one or
two floor single-family houses or small company buildings, as well as for heating hot domestic
water.
Outer view of hot water boiler from series BiSolid Comfort is presented in Figure 1.
Figure 1. Outer view of hot water boiler BiSolid Comfort.
The main advantages of the boilers from series BiSolid Comfort 03/04/05 are:
The pellet burners from series BiSolid GP are fully automated – ignition, flame control,
combustion chamber blowing. They are also equipped with intuitive LCD display for
easy operation.
Automatic adjustment of fresh air and fuel feed rates according to the selected
operating temperature, which feature provides high efficiency of the appliance at
minimum fuel consumption.
The combustion chamber of the burner is made from fire resistance steel, which
guarantees reliable and long-term operation.
Automatic modulation of the burning process decreasing the number of stops and
ignitions, respectively fuel and electricity consumption.
Availability for wide range regulation of the heat carrier (water) temperature.
Availability for operation with room thermostat and weekly programmer.
Circulations pump control according to the heat carrier (water) temperature.
Availability for control of extraction fan.
Self operation optimization depending on the building and system inertia.
Quiet operation and low electric power consumption.
Protection from back-fire and from heat carrier (water) freezing.
Table 4 presents technical data of hot water boiler from series BiSolid Comfort 03/04/05
operating with wood logs and wood pellets.
