When measuring alignment, follow the below instructions.
① Level Accuracy is as per below.
Tread
in CL, and axle center of vehicle front tyre is on FCL.
② Make sure to put (insert) Fixing Pin into Turning Radius Gauge and Slip Plate
when driving in and out vehicle.
vehicle in the position where Front tyre is in the center of Turning Radius
Gauge.
④ DO NOT aggressively start, braking, turning on the Drive-On Plate.
The above measurement accuracy is based on the condition that vehicle is symmetric
③ Drive in vehicle straight along the center line of Drive-On Plate and park the
1300mm ～ 1650mm
Balance - Less than 2mm
Alignment Measuring Range
Level Accuracy
in Alignment Measuring Position
Wheel Base
2000mm ～ 3100mm
Balance - Less than 4mm
(Including Diagonal direction)
If Fixing Pin is not inserted and vehicle drive in or drive out, it could damage Turning
Radius Gauge and Slip Plate.
If not parking vehicle on correct position, it could damage Turning Radius Gauge and
Slip Plate, and malfunction of measuring accuracy.
If driving agressively start, braking and turning, it could damage the lift and vehicle.
