Swing Board can be swivelled (turned) approx. 60°angle range. By putting
Attachment on Swing Borad, it can reach distant lifting point of the vehicle,
and can lift up.
『 How To Use Swing Board 』
① Grab Grip and swivel Swing Board out. ② Put Attachment on Swing Board
By putting Attachment on Slide Arm, lift can lift up the vehicle which has lifting
point in the frame.
『 How To Use Slide Arm 』
① Grab Grip of Swing Board and swivel Swing Board out.
② Grab Grip of Slide Arm and pull the Slide Arm out.
③ Put the Attachment into the hole of Slide Arm
Grip
Swing Board
Attachment
・
Make sure to swivel (rotate) Swing Board by grabbing (holding) Grip. If grab the other
parts but Grip, fingers and hands could be pinched and get injured.
･
If Attachment is put on Swing Board with Swing Board being kept stored (folded) in,
Swing Board Supporter could be pulled towards front side and rotate when Upper Lift
is lowered and vehicle tyre landed on Drive-On Plate. If this happened, store Swing
Board back first, and then lower the Drive-On Plate.
Grip
Swing Board
Slide Arm
Grip
Attachment
・
Make sure to pull Slide Arm out by grabbing (holding) Grip. If grab the other
parts but Grip, fingers and hands could be pinched and get injured.
･
Push Slide Arm back into Swing Board and store Swing Board back, and then lower the
Drive-On Plate.
