Push
"Level"
and
"Up"
(or
"Down"
) button of Lower Lift together at same time.
Then Left side Drive-On Plate from car entrance direction would
rise
(or
lower
).
Unbalance can be rectified (adjusted) by adjusting the Left side levelling.
This switch adjust the height of right side and left side
Drive-On Plate of Lower Lift (or Upper Lift).
By pushing "Level" and "UP" or Down" at same time, left side
Lower Lift (Drive-On Plate) (or Upper Lift) rise (or lower).
Adjust the height of both sides by checking visually.
By pushing "Up" button, Upper Lift rise, and stop rising
when releasing button.
By pushing "Down" button, Upper Lift lower, and stop lowering
when releasing button.
By pushing "Up" button, Lower Lift rise, and stop rising
when releasing button.
By pushing "Down" button, Lower Lift lower, and stop lowering
when releasing button.
･
DO NOT push "Up" button just after pushing "Down" button. If "Up" button is pushed just
after pushing "Down" button, Lowering Valve could be kept open, and lift may keep lowering.
Make sure to wait 1 to 2 seconds before pushing "Up" button. This symptom is normal.
･
When rectifying the unbalance of Drive-On Plate, only Left side (from car entrance direction)
would rise or lower. Pay close attention not to raise (or lower) wrong side which would
increase
