Perform Pre-Operation Checks before operation everyday. The check must be done without load.
Check for any foreign articles in the posts
Check for any obstacles on the Drive-On Beams
Check for any deformation, damage or wear
Select Valver Lever
Check for smooth operation
Control Lever
Check for smooth operation
Carriage Safety Lock
Handle (Main Post)
Leaf Chain
Check for any foreign articles such as dirt or sand
Wire Rope (Cable)
Check for any foreign articles such as dirt or sand
Check for abnormal noise
Electric Circuit
Check that proper earthning is provided
Bolts and Screws
Check for tight fastening
-13 -
Hydraulic Circuit
Visual
Visual
Visual
Check the hydraulic piping, the cylinder, and the
hydraulic unit for any oil leakage
Check if Safety Lock is engaged when raising Wheel
Free Lift (Upper Scissor Lift) to the top
Safety Lock Release
Lever(Model FP3500X
and FP4000X only)
Safety Hook on End
Beam A (Main Post)
Refastening
Visual
Hearing
Visual and Hearing
Check if the Carriage Safety Lock Handle is returned
to be put in "Lock" position when lowered to bottom
Visual and Hearing
Visual
Visual
Visual
Check for the sound (chattering) made by Safety Hook
during lifting operation
Check Method
Check Item
Visual
Side Sill Block
(Model FP3500X and
FP4000X only)
Check for smooth lifting and lowering of the lift
and any abnormal noise during operation.
Visual and Hearing
Visual
Visual
Parts and major
components of the lift
Visual
Check Drive-On Beams, Drive-On Ramps, End Beams,
Posts, Wheel-Free Lift (Upper Scissor Lift) and
Cylinder for any deformation, damage or wear
Point to be checked
If any possible abnormality is detected, prohibit the use of the lift until abonormality is fully
repaired. Then contact your lift supplier immediately. If the lift is used with abnormality left
unsolved, damage to the lift or serious accident may occur.
Caution
If any malfunctioning or abnormality is found, DO NOT OPERATE the lift. Contact lift supplier for the
repair.
Warning
