No.1
Main Post
No.10
Main Cover (D. Beam Cover)
No.2
Sub Post A
No.11
Sub Cover (End Beam Cover)
No.3
Sub Post B
No.12
Beam Plate
No.4
Sub Post C
No.13
Pulley
No.5
End Beam A
No.14
Wire(Cable) End (Adjust) Nut
No.6
End Beam B
No.15
Safety Bar
No.7
Drive-On Beam A
No.16
Hydraulic Unit
No.8
Drive-On Beam B
No.17
Drive-On Ramp
No.9
Pipe Cover(X Model Only)
Model FP3500X and FP4000X has this Select Valve Lever. For lifting and lowering the
Drive-On Beams, push the lever upto "HOIST" position. For lifting and lowering the
Upper Scissor lift, push the lever down to "SCISSORS" position.
This lever controls the lifting and lowering of the lifts. Release the lever to stop
the lift immediately.
・Push the lever to "UP" side to turn the motor and raise the lift.
・Push the lever to "DOWN" side to lower the lift.
- 7 -
Select Valve Lever
Control Lever
