Check if there are any tools or obstacles inside the Wheel Free (Upper Scissors) Lift
and under the vehicle. If any are found, remove them away from lift.
Push the Control Lever to
direction. Lower the Wheel Free (Upper Scissors) Lift
to the lowest position without stop in midway, and keep pushing lever for 2 seconds
before releasing. If the lift does not lower, raise the lift slightly, and then lower
the lift.
Turn Select Valve Lever from "Scissors" to
mode.
Push the Control Lever to
direction. Pay close attention for any vehicle tilt
during the lowering of the lift.
Lower the lift to the lowest position.
Drive the vehicle out carefully.
-16 -
If the vehicle is falling from the lift, move away quickly. DO NOT attempt to support the vehicle.
Danger
・
Keep anyone but the operator out from around the lift area.
・
Before start servicing vehicle, make sure Safety Hooks are "engaged".
・
DO NOT swing, shake, or push the raised vehicle.
・
DO NOT leave a vehicle on the lift for a long time.
・
If the vehicle tyres are free (neutrtal), make sure to put the Wheel Stop, or pull the Side Brake.
Warning
・
DO NOT get under vehicle when operating the lift
・
Pay close attention for any vehicle tilt during lifting and lowering of the lift
Warning
・
When lowering the lift, pay constant attention to the area around vehicle and lift.
NEVER look aside during the operation.
・
Before start lowering the lift, make sure there are nobody and no obstacles at lift area.
Caution
・
DO NOT get under vehicle when operating the lift
・
Pay close attention for any vehicle tilt during lifting and lowering of the lift
・
DO NOT lower lift while any stand or support such as mission jack etc. is in position under vehicle
・
When lowering lift, keep feet clear of Drive-On Beam and Wheel Stop to avoid being squished.
Warning
・
When lowering the lift, pay constant attention to the area around vehicle and lift.
NEVER look aside during the operation.
・
Before start lowering the lift, make sure there are nobody and no obstacles at lift area.
Caution
