MAINTENANCE
ROTATING GRINDING WORM
TO AVOID SERIOUS PERSONAL INJURY
ALWAYS
Turn Off, Unplug From Power Source and Perform Lockout/Tagout Procedure to This
Machine
BEFORE
Servicing.
NEVER
Touch This Machine Without Training and Authorization By Your Supervisor.
NEVER
Place Hands Into Machine Input or Output Openings.
NEVER
Bypass, Alter, or Modify This Equipment in Any Way From Its Original Condition.
PROMPTLY REPLACE
Any Worn or Illegible Labels.
USE ONLY GENUINE BIRO
Parts and Accessories Properly Installed.
A. HIGH TORQUE DRIVE SYSTEM
The Model 722 is driven by a High Torque Drive system for power transmissions.
“No Lubrication” is required (in fact) be sure no lubricant comes in contact with the sprockets or belt.
To insure a long life to the drive components:
1. Be sure the motor shaft and main drive shaft are parallel.
2. Be sure sprockets are in alignment.
3. Proper HTD belt tension is
3
32
" on one side.
Tension should be checked every six (6) months.
B. BEARINGS
1. The main bearings are sealed for life. No need to lubricate.
2. Lubricate the motor bearings once a year with bearing grease.
7
