LIMITED WARRANTY
WARRANTY:
The BIRO Manufacturing Company warrants that Model 722 Grinder will be free
from defects in material and workmanship under normal use and with recommended service.
BIRO will replace defective parts, which are covered by this limited warranty, provided that the de-
fective parts are authorized for return, shipping charges prepaid, to a designated factory for in-
spection and/or testing.
DURATION OF WARRANTY:
The warranty period for all parts covered by this limited warranty is
one (1) year from installation/demonstration as advised on the returned warranty registration card,
or eighteen (18) months from original factory shipping date, whichever occurs first, except as
noted below.
PARTS NOT COVERED BY WARRANTY:
The following are
not
covered by this limited warranty:
wearable parts in the grinding system such as bowl, worm drive shaft, end ring, worm, knife drive
pin. This limited warranty does not apply to machines sold as used, rebuilt, modified, or altered
from the original construction in which the machine was shipped from the factory. Water contam-
inated electrical systems are not covered under this limited warranty. BIRO is not responsible for
electrical connection of equipment, adjustments to switch components or any other electrical re-
quirements, which must be performed only by a certified electrician. BIRO is not responsible for
service charges or labor required to replace any part covered by this limited warranty or for any
damages resulting from misuse, abuse, lack of proper or recommended service.
EXCLUSION OF WARRANTIES AND LIMITATION OF REMEDIES:
BIRO gives no warranties
other than those expressly stated in this limited warranty. THE IMPLIED WARRANTY OF MER-
CHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR PROCESSING OF FOOD PROD-
UCTS, AND ALL OTHER IMPLIED WARRANTIES ARE SPECIFICALLY EXCLUDED. BIRO IS NOT
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, EXPENSES, OR LOSSES. THE
REMEDIES PROVIDED IN THIS BIRO LIMITED WARRANTY ARE PURCHASER’S SOLE AND EX-
CLUSIVE REMEDIES AGAINST BIRO.
REGISTRATION CARDS:
You must sign, date and complete the warranty registration card sup-
plied with each machine. The warranty registration card must be returned to The Biro Manufac-
turing Company for proper registration. If no warranty registration card is returned to BIRO, the
warranty period will begin from the date the machine was originally shipped from the factory.
HOW TO GET SERVICE:
1. Contact the agency from whom you purchased the machine; or
2. Consult the yellow pages of the phone directory for the nearest authorized dealer; or
3. Contact BIRO Mfg. Company for the authorized service entity (250 plus worldwide) in your
area.
THE BIRO MANUFACTURING COMPANY
1114 Main Street
Marblehead, Ohio 43440-2099
Ph. 419-798-4451
Fax 419-798-9106
E-mail: [email protected]
Web: http://www.birosaw.com
16
PART NO. C757-275
Form No. 722-275-1-07-5 COMM
PART NO. C757-275
Form No. 722-275-1-08-6 ACME
