11
CLEANING
SHARP MOVING BAND TYPE SAW BLADE
TO AVOID SERIOUS PERSONAL INJURY
ALWAYS
Turn Off, Unplug from Power Source and Perform Lockout/Tag Out procedure to This Machine
BEFORE
Cleaning or Servicing.
ONLY
Use Recommended Cleaning Equipment, Materials and Procedures.
NEVER
Spray Water or Other Liquid Substances Directly at Motor, Power Switch or any Other Electrical
Components.
ALWAYS
Thoroughly Clean Equipment at Least Daily.
CLEANING THE BIRO POWER SAW:
Disconnect electrical power to the machine before cleaning. Parts to be removed have been made accessible
and can be removed without tools. Notice in the drawing below that all parts are numbered. Each part should be
removed for cleaning in the numbered sequence shown. To ensure cleaner cuts, keep the parts on the
cleaning system in good condition. Parts on the cleaning system which should be checked weekly, and changed
as required are as follows: Wheel Cleaners (Part No. 179), Saw Cleaners (Part No. 131), Saw Guide in
Stationary Bar (Part No. S119A ), Upper Saw Guide (Part No.S602B ), Lower Blade Back-Up Guide (Part No.
S608), and Nylon Filler (Part No. 177).
4
1
8
5
9
10
2
6
7
11
3 Saw Blade
4
1
8
5
9
10
2
6
7
11
3 Saw Blade
4
1
8
5
9
10
2
6
7
11
3 Saw Blade
4
1
8
5
9
10
2
6
7
11
3 Saw Blade
4
1
8
5
9
10
2
6
7
11
3 Saw Blade
4
1
8
5
9
10
2
6
7
11
3 Saw Blade
4
1
8
5
9
10
2
6
7
11
3 Saw Blade
4
1
8
5
9
10
2
6
7
11
3 Saw Blade
Содержание 44SSFH
