5
11. The stationary platter is placed on top of the base structure and held in place by two platter hold down
catches located in the base structure.
12. The sliding meat carriage assembly is installed on the channel. Start by turning the movable stop assembly
clockwise. After the carriage assembly has been installed on the channel for operation, turn the movable
stop assembly counterclockwise to lock.
13. Make sure saw guide bar with saw guard is in its lowest position. Close head and base doors.
10. Turn the blade tensioning handle clockwise until the tension mark is even with the bottom of the upper
wheel hinge plate as shown. Carefully turn saw wheels by hand and watch for proper tracking of blade on
the wheels.
KEEP HAND CLEAR OF SHARP MOVING BAND TYPE SAW
BLADE
14. Push the start button. Check for proper phasing of the motor and proper tracking of the saw blade in the saw
guides. Back of the blade should be centered in the lower saw guide in the stationary bar. Blade should be
moving down through the guide. Push the stop button to stop machine.
15. Check placement of all warning labels, wall chart and Manual. Machine is ready for trained operators to
process product.
16. Contact your local Distributor or BIRO directly if you have any questions or problems with the installation
or operation of this machine.
Содержание 44SSFH
