BIRD 4042E, Руководство по эксплуатации

Страница: 19 / 31

Sensor Operation
10
RF Measurement Alarms
The 4042E power sensor can be set to display an alarm, and send SNMP
messages, for exceeding forward power and VSWR limits set by the user.
Alarms are controlled on the settings page, see
Figure 9
. There are
Composite
Signal Alarm Settings
and alarm settings for each configured channel, see
"Channel Edit Pane" on page 12
.
Figure 9 4042E Alarm Settings
Composite Signal Alarm Settings
The alarm function may be enabled or disabled and alarms can be set to latched
or unlatched, see
Figure 10
.
When enabled, a measurement exceeding a threshold will display an alarm
message in the Table View, see
Figure 11
.
When disabled, alarms are not displayed and no SNMP traps will be generated.
When set to latched, alarm messages remain on the display until the Reset
Alarm button is clicked on the settings page.
When set to unlatched, alarm messages are only displayed while the threshold is
exceeded.
Figure 10 Composite Signal Alarm Settings
&RPSRVLWH6LJQDO
$ODUP6HWWLQJV
&KDQQHO
$ODUP6HWWLQJV