Bird Electronic Econoload 8730 Series, Инструкция

Страница: 20 / 35

Bird 8730 Series Econoload RF Load Resistor
10
Unflanged Coupling:
To couple the unflanged connector with an
unflanged RF line, use an appropriate coupling kit. Refer to Figure 5
while following the instructions below:
y
Insert the center bullet and bottom it on the midpoint nibs.
y
Position the outer sleeve, with clamping bands, over the input
connector.
y
Set the transmission line snugly against the coupling stops.
y
Position the clamping bands evenly about 3/4” from the ends of
the sleeve.
y
Tighten the clamping bands.
Figure 5
Unflanged
Coupling
RF COAXIAL
LINE
CLAMPING
BANDS
CONNECTOR
SLEEVE
BULLET LOAD