Bird Electronic Econoload 8730 Series, Инструкция

Страница: 19 / 35

Installation
9
Connecting RF Power
After installing the Econoload, the RF transmission line can be
attached using standard coaxial line coupling kits.
Swivel Flanged Coupling:
To couple the swivel flange with a flanged
RF transmission line, use an appropriate coupling kit. Refer to
Figure 4 while following the instructions below:
y
Insert the center bullet and push it in until it is fully seated.
y
Connect the coaxial input in a straight line and push carefully on
the center conductor to close.
NOTE: The swivel flange on the load makes connection
independent of the orientation of the fixed flange on the coaxial
input outer conductor.
y
Insert the bolt sets and tighten evenly all around to transmission
line manufacturer’s recommended torque. Use all of the bolts.
WARNING
Never attempt to connect or disconnect RF equipment from the
transmission line while RF power is being applied.
Leaking RF energy is a potential health hazard.
Figure 4
Swivel Flanged
Coupling
BOLT BULLET LOAD RF COAXIAL LINE