Biotek ELx808, Руководство оператора, Страница: 125 / 172

Clean Exposed Surfaces
|
103
Warning! Mucous membranes are considered prime entry
routes for infectious agents. Wear eye protection and a
surgical mask when there is a possibility of aerosol
contamination. Intact skin is generally considered an
effective barrier against infectious organisms; however, small
abrasions and cuts may not always be visible. Wear
protective gloves when handling contaminated instruments.
Important! Do not immerse the instrument, spray it with
liquid, or use a “wet” cloth. Do not allow water or other
cleaning solution to run into the interior of the instrument. If
this happens, contact BioTek’s Technical Assistance Center.
Important! Do not soak the keypad – this will cause
damage. Moisten a clean cloth with deionized or distilled
water and wipe the keypad. Dry immediately with a clean,
dry cloth.
Clean Exposed Surfaces
Important! Turn off and unplug the ELx808 for the
cleaning procedure.
Exposed surfaces may be cleaned (not decontaminated) with a cloth moistened (not
soaked) with water or water and a mild detergent. You will need:
•
Mild detergent
•
Deionized or distilled water
•
Clean cotton cloths
To clean the exposed surfaces:
1. Turn off and unplug the instrument.
2.
Moisten a clean cotton cloth with water, or with water and the mild detergent.
Do not soak the cloth!
3. Wipe the plate carrier, the inside of the plate carrier door, and all exposed
surfaces of the instrument.
ELx808 Operator’s Manual