2. The battery compartment is located at the back of the Audio Heart Rate Monitor. To
install/replace the battery, insert a coin into the slit of the compartment lid and turn it
clockwise. The lid should come off easily. (remove used battery CR 2032) (Diagram 1-2)
3. Gently place the battery into the battery slot of the battery compartment. (Diagram 1-3)
4. Put the compartment lid back into place and tighten it firmly by turning it anti-
clockwise with the help of a coin. (Diagram 1-4)
5. Push back the clip on the Audio Heart Rate Monitor. (Diagram 1-5)
Heart Rate Belt
1. Hold the heart rate belt firmly. Insert a coin into the slit of the compartment lid and
turn it clockwise. The lid should come off easily. (Remove used battery CR2032)
(Diagram 2)
2. Gently place the battery into the battery slot of the battery compartment. (Diagram 3)
3. Put the compartment lid back into place and tighten it firmly by turning it anti-
clockwise with the help of coin.
Troubleshooting
Should you encounter any problems with the Audio Heart Rate Monitor (e.g. malfunction
of a parameter, or the need to reset the device), simply press the RESET key (located on
the back of the heart rate monitor). All data previously input into the device would be
deleted and you can then start over and input new data. If on a rare occasion the Audio
Heart Rate Monitor fails to function, press and hold the
Set
button in order to clear all
data, after which you can input all necessary data again. Should this fail to fix the
problem remove the batteries and then put them back in the compartment. Turn on the
device by pressing the
Mode
button, and following the steps previously outlined re-enter
all needed data. Press the reset key after changing a new battery.
Inte rference
