BiOptic Qsep1, Руководство по эксплуатации, Страница: 25 / 34

25
Du ring the “HV Check”, the last LED will show red light
Blue → SD card
green → WiFi connectable
red → HV check
14- 2. Click “Calibrate”.
*The “Calibrate” button will only display after HV check passed.
* For troubleshooting, please refer to cartridge unpacking guide for details.
15. To analyze samples, click on the blank column and designate the sample
locations, test method, runs and result name followed steps 15-1 to 15-4
15- 1. Click the “Sample Position”, mark the position of sample on the plate and
then click “OK”.
①
②
③ ④