55
Chapter 9 - Electronic Registration of Replacement Parts
7. Once the Control Unit is registered, locate the System ID Number on the L300
System carrying case (for example, A334). Write the number on the blank label on
the back of the Control Unit. See Figure 9-3. This ID number identifies which L300
System the new Control Unit is registered to.
Figure 9-3: Control Unit Blank Label for the System ID Number
Registering a New RF Stim Unit
Set-Up
1. Turn off the Control Unit.
2. Remove the old L300 RF Stim Unit from the L300 FS Cuff cradle.
3. Put the old L300 RF Stim Unit in an envelope for shipment to Bioness. Then, place it
at least 30 feet (9 meters) from the components you are registering.
4. Locate the System ID Number on the L300 System carrying case (for example,
A334). Write the number on the blank label on the back of the new RF Stim Unit.
See Figure 9-4. This number identifies which L300 system the new RF Stim Unit will
register to.
5. Attach the new RF Stim Unit to the L300 FS Cuff cradle.
6. Connect the new RF Stim Unit to the System Charger Set during registration.
7. Place the L300 FS Cuff with the attached new RF Stim Unit, the Control Unit, and the
Intelli-Sense Gait Sensor close together on a table but not touching. See Figure 9-1.
Blank Label
Содержание NESS L300
