Biomomentum MA056, Руководство пользователя

Страница: 44 / 59

M A C H - 1 U S E R M A N U A L V 8 . 8
44
Figure 58: “Single - axis load cell calibration” Window
5 . 4 . 7 . 1 I N S E R T
Clicking the “Insert” button will add a “<NEW>” line in the table, as shown in the following
figure.
Figure 59: “Multiple -axis load cell calibration” Window with a “<NEW>” Line
Double-click the line to edit the parameters: the “Calibration Weight” window will appear.
Figure 60: “Calibration Weight” Window
Enter the name of the calibration weight (e.g. its serial number or its nominal value) in the
“Name” box .
Enter its weight (in newtons) in the “ Fz, N ” box. Enter the torque according to the x (“Tx,
N.mm”) or y (“Ty, N.mm”) (in newton-millimeters) if you wish to perform a calibration using the
torque. The force along x (“Fx, N”) and y (“Fy, N”) as well as the torque along z (“Tz, N.mm”)
can also be set if required.