BIOMET innerVue II, Руководство по эксплуатации и уходу

Страница: 8 / 40

6
InnerVue
™
II Diagnostic Scope System
Recommended separation distances between portable and mobile RF communications
equipment and the InnerVue
™
II Diagnostic Scope System
The InnerVue
™
II Diagnostic Scope System is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The customer or the user of the InnerVue ™ II System can
help prevent electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmitters) and the InnerVue ™ II Diagnostic Scope System as
recommended below, according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter (W)
Separation distance according to frequency of the transmitter
150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5 GHz
0.01 0.035 0.035 0.07
0.1 0.11 0.11 0.22
1 0.35 0.35 0.7
10 1.12 1.12 2.21
100 3.5 3.5 7
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated
using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures,
objects and people.
1.5 Warranty Information
When delivered to the end user in new condition in the original container, the
InnerVue
™
II Diagnostic Scope System is warranted to be free from defects in
material or workmanship for one year from the date of shipment from Biomet
Sports Medicine to the end user.
Within the above listed time periods, parts that are returned, freight prepaid, to
Biomet Sports Medicine and are determined by Biomet Sports Medicine to be
defective will be repaired or replaced by Biomet Sports Medicine without charge
for parts, labor, or return ground shipping costs. Biomet Sports Medicine will make
every effort to accomplish this repair or replacement within a reasonable time.
After the warranty period, the purchaser must pay all charges for repair and
replacement. This warranty does not cover products intended for single patient use
beyond the initial use or consumable items.
The above actions by Biomet Sports Medicine shall constitute your exclusive
remedy and Biomet Sports Medicine’s sole obligation under this warranty.
Biomet Sports Medicine shall not be responsible for warranty claims made
after the warranty period. To obtain warranty repair service, you must contact
Biomet Sports Medicine to obtain a Return Material Authorization (“RMA”)
number, then return the product, freight prepaid, to Biomet Sports Medicine.
The RMA number and a complete explanation of the problem must be included
with the product being returned to Biomet Sports Medicine for warranty
service. The product to be repaired must be returned in its original box and
packaging, or a similar box and packaging affording an equivalent degree of
protection. Upon completion of repairs, Biomet Sports Medicine will return the
product to the end user, freight prepaid.