BIOMET innerVue II, Руководство по эксплуатации и уходу

Страница: 32 / 40

30
InnerVue
™
II Diagnostic Scope System
File System Manager
This option provides information on the number and size of images you have
already captured on this CompactFlash® card. Specifically:
Type of Capture (Still, Video, or Audio);
Number of Records Captured (in each of the above modes);
Amount of Space Used on this card (for each of the above modes, in Megabytes—
“MB”).
When you are finished with this information, press the Store/Enter button (F9 key)
to return to the Setup menu.
“Format Media” Option
To format (i.e. erase all information on, and “re-initialize”) this card, perform the
following steps:
Hold down both the Delete and Select > buttons at the same time or press the F11
key on the keyboard.
To confirm formatting of this card, hold down both the < Select and Select >
buttons at the same time or press F11 on the keyboard. This will start the
formatting and re-initialization process. When this process is complete, you will
return to the File System Manager screen.
To cancel this process, press the Store/Enter button (F9 key). You will return to the
File System Manager screen.
OSD Overlay Position
This option allows you to adjust the vertical positions of the Name/ID and Date/
Time strings that are included with every image you capture.
Note: The Name/ID string appears at the top of the display. The Date/Time
string appears at the bottom of the display.
To select a string to move, press the < Select or Select > buttons (or the F7 or F8
keys, respectively) to highlight that string.
To move the string up/higher in the display, press the Mode button (F5 key).
To move the string down/lower in the display, press the Delete button (F6 key).
When you are finished with these adjustments, press the Store/Enter button (F9
key) to accept them and return to the Setup menu.
Lamp Counter Notification
This is a password-protected factory setting that can only be accessed by Biomet
Sports Medicine authorized personnel. Press the Store/Enter button (F9 key) to exit
and return to the Setup menu.
Setup and Basic Usage