BIOMET innerVue II, Руководство по эксплуатации и уходу

Страница: 26 / 40

24
InnerVue
™
II Diagnostic Scope System
3.1.5.2 Accessories & Attachments
You can also connect different accessories to your InnerVue™ II Diagnostic Scope
System:
Note: Refer to Section 2.2.1 for the location of connectors.
If you have audio tag recording enabled with your image captures, audio can be
played back and heard from the InnerVue
™
II unit’s speaker.
If you want to add a Name & ID tag to a card, then you will need to connect a
PS/2 keyboard to the InnerVue
™
II Diagnostic Scope System. To do this, insert the
keyboard plug into the keyboard jack on the left side of the InnerVue ™ II display.
Note: This connection does not support USB keyboards with PS/2 converters.
To connect the InnerVue ™ II Diagnostic Scope System to a separate computer,
insert the appropriate USB plug into the USB jack on the left side of the InnerVue
™
II
display. Your computer will display “New Hardware Detected” (or similar) messages
as a result of this connection and you can view the files on your CompactFlash®
card through your computer (as well as directly from the InnerVue
™
II system).
The MediaCaptureUSB software installation provides drivers that allow Windows
2000 and XP systems to use the InnerVue
™
II system as a video source. These drivers
will also be available for other software on your system that is aware of such
multimedia devices. The “BioVision ViCAM III Utilities > ViCAM III AMCAP” software
(also included with this installation) provides a window on your main computer
monitor that mirrors the InnerVue
™
II display.
Note: If you have not already installed the MediaCaptureUSB software on the
appropriate computer, you will need to do so at this point:
• Disable all virus protection software on this computer, and close any other
programs that may be running.
• Locate the MediaCaptureUSB software, start the installation program (“install.
exe”), and follow the installation wizard’s instructions.
• When the installation process is completed, restart your computer.
• If you experience any problems with this process, check with your system
administrator.
3.1.5.3 CompactFlash® Card
To begin capturing and reviewing images, insert a CompactFlash® (e.g. SanDisk™,
etc.) card into the media slot at the top of the InnerVue™ Diagnostic display until it
is fully seated.
Note: MediaCaptureUSB supports CompactFlash® Type I and Type II cards.
Video capture will benefit from faster cards such as SanDisk™ Ultra II or
Extreme III series or comparable cards.
Setup and Basic Usage