BIOMET innerVue II, Руководство по эксплуатации и уходу

Страница: 20 / 40

18
InnerVue
™
II Diagnostic Scope System
Setup and Basic Usage
The following section describes how to set up and use the InnerVue ™ II Diagnostic
Scope System for surgical procedures.
3.1 Setup
Proper initial setup is essential to provide you
and your staff the best access to operational
and visual performance while conducting procedures.
3.1.1 InnerVue
™
II Diagnostic Scope System
For best performance, always operate and keep the
InnerVue
™
II unit on a flat, level, and secure surface.
Images on the Integrated Video Display are best
viewed at an angle perpendicular to the display.
Do not tilt the InnerVue
™
II unit. For better viewing,
adjust the height and display angle.
3.1.2 Attaching a Camera Handpiece and
Arthroscope
The InnerVue
™
II camera handpieces attach via
a combination fiberoptic/electric connector. This
connector seats in the receptacle on the front of the
unit (See also: § 2.2.1 Front).
Before connecting a camera handpiece to the InnerVue™ II unit, the camera or
handpiece must be properly cleaned.
Note: For best image quality and to ensure patient safety, verify that both ends of
the camera or handpiece are free of foreign particles.
Connecting the scope and
handpiece to the InnerVue™ II
unit: Align the colored dot on the
handpiece connector with the
matching dot on the input port of
the video box. Once the dots are
aligned, insert the optical plug into
the input port.
Adjust display up/down for
Optimal Viewing Angle
Swivel display side-to-side
for Optimal Viewing Angle