Biomedical Life Systems BIOMED REVIVED II, Инструкция по эксплуатации, Страница: 22 / 36

22
Setting Treatment Time
Once a setting mode has been selected, press and hold the
[P] button to adjust the treatment time by pressing [+] button
to increase or [-] button to decrease treatment time.
When finished with the treatment time selection, press the
[M] button and proceed to “start treatment” on page 24 to
begin treatment.
Caution:
Pre-programmed treatment settings
described previously are optimal for most individuals.
The following advanced setting procedures should
only be used by a physician who is familiar with pulse
rate and pulse width settings.
Advanced Program Settings
Press the [P] button to select the U setting mode for the follow:
• TENS U programs U1 through U3.
• EMS U programs U1 through U3.
Mode Program Time Adj.
Pulse
Rate(Hz)
Pulse
Width (µs)
Function
TENS
PU1 5-90 min. 2-100 Hz 100-300 µs Continuous
PU2 5-90 min. 2-100 Hz 100-300 µs Modulation
PU3 5-90 min. 2-100 Hz 100-300 µs Modulation
EMS
PU1 5-90 min. 2-100 Hz 100-300 µs Continuous
PU2 5-90 min. 2-100 Hz 100-300 µs Synchronous
PU3 5-90 min. 2-100 Hz 100-300 µs Alternate