Biomedical Life Systems BIOMED REVIVED II, Инструкция по эксплуатации, Страница: 16 / 36

16
Connect electrode wires to device
Insert the electrode wires connector into electrode connector.
Make sure they are properly connected to ensure good
performance.
Connect electrode wires to device
Before proceeding to this step, ensure that the device is
completely switched OFF. Hold the insulated portion of
the electrode wire connector, and insert the plug into the
receptacle on the top of the main device.
Ensure the electrode wires are inserted correctly. The device
has two output receptacles controlled by channel 1and
channel 2 at the top of the unit. You may choose to use one
channel with one pair of electrode wires or both channels
with two pairs of electrode wires. Using both channels gives
the user the advantage of stimulating two different areas at
the same time.
Caution
Do not insert the plug of the electrode wires into any AC
power supply socket.
Electrode options
The electrodes should be routinely replaced when they start
to lose their adhesiveness. If you are unsure of your electrode
adhesive properties, please order new replacement electrodes.
Replacing electrodes should be reordered under the advice of
your physician or the device manufacturer to ensure proper
quality. Follow application procedures outlined on electrode
packing when using the new replacement electrodes to