BioLite CampStove, Инструкция по эксплуатации

Страница: 9 / 35

16 |
| 17
2 2
Run Run
1. Use dry fuel whenever
possible.
2. For hottest and most
efficient fire, make sure that
there is space between the
pieces of wood, the holes on
the side of the
Fuel Chamber
are not blocked, and all
wood is entirely inside the
Fuel Chamber
.
3. To avoid excessive smoking,
use small twigs to restart a
fire from embers.
Weight:
2 lbs. 1 oz. | 935 grams
Fire Output (peak):
3.4 kW (lo mode)
5.5 kW (hi mode)
USB Power Output:
2W @ 5V (max continuous)
4W @ 5V (peak)
Pot Weight Limit:
8 lbs or 1 gallon of liquid
Orange Plastic Power Module
Remove from stove body and wipe down with
a damp cloth with soap and water. DO NOT
submerge in water or allow to get excessively wet.
Stainless Steel Stove Body
Clean out all ash and scrub with nylon brush.
Dry thoroughly.
Keep CampStove in a cool, dry, and well-ventilated place.
Avoid storage in excessive heat.
Keep out of reach of children.
If stove is stored for more than six months, the battery may need to be
reconditioned. Follow the instructions in Step 0 to charge your battery.
USB not charging
(orange bar light)
Insufficient fire
Battery not charged
Battery not charged
(if flashing light)
(if no flashing light)
Add more fuel to the fire.
Add more fuel to the fire to charge the battery or recondition
battery at home.
Charge battery by plugging
Power Module USB
connection to computer.
Contact BioLite.
Check cable connection. Unplug cable on both ends and try again.
Unplug cable on both ends. Hold Power Button for 3 seconds and
wait for the Power Module to automatically turn back on. When
charging capability restores, replug cable.
If problem persists, contact BioLite.
USB not charging
(green bar light)
Fan not
running when
button pressed
PROBLEM CAUSE SOLUTION
CLEANING STORAGE
Tips & Troubleshooting Maintenance & Specs
for more troubleshooting, please visit www.biolitestove.com
English English