8
4. CHARGING OF THE DISPENSER
The Biohit
e
LINE Lite Dispenser should be charged using the original Biohit
e
LINE Charging Stand, Charging Carousel or AC-adaptor.
When the dispenser is properly connected to the charger, the led indicator
(Fig. 6.) lights up and stays on as long as the dispenser is connected to the
charger.
When the dispenser requires charging, the battery symbol and “lo bat”-
text will appear in the display (Fig. 6.). You need to con
fi
rm that by pressing
“enter”, only after that you can complete your work, and/or start charging the
dispenser. Please note that if “enter” is not pressed the dispenser will not
start charging, even placed in charging stand/connected to AC-adaptor.
Note:
In case you continue to work with the dispenser after the low bat-
alarm, the battery will eventually be completely discharged. Then the
battery-symbol and led indicator start to blink, and there is no response
from operating buttons. Charge the dispenser.
Initial charging of 30 minutes is required before use, if the battery is totally
discharged. During that time the “Load”-text is displayed and you can’t use
the dispenser.
When the text disappears from the display, you can continue to work with the
dispenser keeping it still connected to the charger.
Fig. 6.
Led indicator
Battery symbol
