F11
F12
6
EN
Once there are no more live mosquitoes in the trap
follow the steps for the maintenance of the Mos-
quitito trap:
1.
Remove the trap body from the intake funnel
[F11].
2. The mosquitoes are sometimes blown up into the
top edge of the trap by the fan. Shake the trap
slightly to shake the mosquitoes down toward
the center.
3. Once the majority of the caught mosquitoes are
down in the middle point of the trap, open the
bottom of the trap and shake the mosquitoes out
of the trap [F12].
4.
Dispose of the mosquitoes properly, either in the
household trash or bio-waste. Remove the old
BG-Sweetscent dispenser from the pouch.
5.
You can then clean the trap properly. Please see
instructions below. It is important that the trap,
especially the top white gauze, remains clean.
6. Once you have cleaned the trap you can place
the new dispenser into the pouch located in the
body of the BG-Mosquitito trap [F1].
7.
Reattach the trap body to the intake funnel [F5-
7], remove the top covering from the intake fun
-
nel and reconnect the power cables.
Cleaning instructions:
Use a damp cloth to clean the plastic part of the trap. Hand wash the BG-Mosquitito body if it becomes
dirty. Do not use any insecticides near the trap because the residues from these products can have a repel
-
ling effect for the mosquitoes and consequently reduce the catch rate of the trap. Do not use any pointy
or rough objects to clean the trap. Only use recommended accessories and parts from the manufacturer.
The use of foreign parts can significantly reduce the catch rate of the BG-Mosquitito trap or even render
it ineffective.
