12
Programming Display
Control Panel
`
LED Screen:
Displays the current setting or error message.
`
Display Set Button:
Used for accessing and changing the temperature
mode and time.
`
Up Button:
Used for increasing the temperature or time setting.
`
Down Button:
Used for decreasing the temperature or time setting.
`
Start/Stop Button:
Used to start or stop a process.
Programmable Features
`
Autocontinue:
The Autocontinue feature, when "ON", allows the program to progress from Preheat to P1 run automatically.
`
Delayed Start:
This feature allows the instrument to be loaded in advance of the desired run start time. This is particularly useful
in having retrieved slides available at the beginning of the work shift. This feature can be disabled by setting the time to zero (0).
`
Preheat:
This feature is available for protocols that benefit from a preheat cycle or to reduce the cycle time for antigen retrieval.
This feature can be disabled by setting the time to zero (0).
To access the following displays, press and hold the DISPLAY/SET button for 3 seconds. To cycle through the screens press the
DISPLAY/SET button.
`
Delayed Start Screen:
Displays the time the programmed run will be delayed before stating automatically.
`
Preheat Screen:
Displays the Preheat temperature setting and the duration of the Preheat cycle.
`
Autocontinue Screen:
Display indicates if the Autocontinue feature is enabled.
`
P1 Set Screen:
Displays the temperature set-point for the programmed run and the duration the temperature will be maintained
after reaching the set-point.
`
P2 Set screens (2):
The first screen displays the programmed temperature at which the cooling fan will turn on. The second screen
displays the temperature at which the cooling fan will turn off.
`
Error Message:
The LCD screen will display the letters “ERR” if the temperature of the system rises beyond normal limits or if there
is a failure of the temperature sensor.
START
STOP
DISPLAY
SET
P1
SET HH:MM:SS
00:00:30
125.0
°
