Biobase BSC-4FA2-HA, Руководство пользователя

Страница: 34 / 39

32
lamp, it needs to keep pressing the button of UV for about five seconds when the machine stays
standby.
Picture 15
3)Replace the fuse
Power plug fuse is located on the power supply board, when replace it, turn off the power and
disconnect plug, take out of the fuse and replace with a new fuse, and then press it back.
Picture 16
NOTE
(1) The above electrical parts must be operated by a qualified electrician in safety conditions
(cutting off power supply). The other parts are not allowed to remove; otherwise the user should
take responsibility by them;
(2) When failures are not occur and the operator can’t solve, please notify our maintenance
department immediately. For your safety, please do not maintain equipment by yourself;
(3) he maintenance of this equipment is undertaken by trained and recognized technicians;