Binder M 115, Руководство по эксплуатации

Страница: 55 / 71

M (E2) 04/2019 page 55/71
Chamber size 53 115 240 400 720
Temperature data
Temperature range, 5 °C above ambi-
ent up to °C
°F
300
572
300
572
300
572
300
572
300
572
Temperature fluctuation
≤
± K
0.3 0.3 0.3 0.3 0.3
Temperature uniformity
(variation)
at 70 °C ± K 0.5 0.6 0.8 0.7 0.7
at 150 °C ± K 1.3 1.5 1.5 1.5 1.9
at 300 °C ± K 2.8 2.8 2.8 5 4.6
Heating up time
to 70 °C min 5 5 6 6 7
to 150 °C min 15 16 19 18 21
to 250 °C min 35 36 42 44 51
Recovery time after door
was opened for 30 sec 2)
to 70 °C min 1 1 1 1 1
to 150 °C min 3 3 3 3 3
to 300 °C min 5 5 5 5 5
Air change data
Air change (air flap open)
at 70 °C x/h 180 87 57 51 33
at 150 °C x/h 192 96 60 54 36
at 300 °C x/h 160 78 54 48 29
Electrical data
IP system of protection acc. to EN 60529 20 20 20 20 20
Nominal voltage (±10 %) 50/60 Hz V 230 1N~ 230 1N~ 230 1N~ 400 3N~ 400 3N~
Nominal power kW 1.20 1.60 2.70 3.40 5.00
Power plug
shock
proof plug
shock
proof plug
shock
proof plug
CEE plug
5 poles
CEE plug
5 poles
Chamber fuse 5x20 mm / 250V / time-
lag T
Amp
10
external
10
external
16
external
--- ---
Over-current release category B, 3
poles
Amp --- --- ---
16
internal
16
internal
Installation category acc. to IEC 61010-1 II II II II II
Pollution degree acc. to IEC 61010-1 2 2 2 2 2
Environment-specific data
Energy consumption
at 70 °C Wh/h 145 230 370 520 570
at 150 °C Wh/h 300 544 850 1200 1320
at 300 °C Wh/h 720 1100 1400 2340 2600
All technical data is specified for unloaded chambers with standard equipment at an ambient temperature
of +25 °C /
77 °F and a power supply voltage fluctuation of ±10. Technical data is determined in accord-
ance to BINDER Factory Standard Part 1:2015 following DIN 12880:2007.
All indications are average values, typical for chambers produced in series. We reserve the right
to change technical specifications at any time.
If the chamber is fully loaded, the specified heating up times may vary according to the load.