Binatone WR3000N, Руководство пользователя

Страница: 10 / 112

WR3000N 300M Wireless N Router
- 4 -
1.4 Panel Layout
1.4.1 The Front Panel
Figure 1-1 Front Panel sketch
The Router’s LEDs and the WPS/Reset button are located on the front panel (View from left to
right).
Name Status Indication
Off Power is off.
PWR
On Power is on.
Flashing The Router is working properly.
SYS
On /Off The Router has a system error.
Off The Wireless function is disabled.
WLAN
Flashing The Wireless function is enabled.
Off There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but
there is no activity.
LAN 1-4,
WAN
Flashing There is an active device linked to the corresponding port.
Slow Flash
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
On
A wireless device has been successfully added to the
network by WPS function.
WPS/Reset
Quick Flash
A wireless device failed to be added to the network by
WPS function.
Table 1-1 The LEDs Description
)
Note:
1) After a device is successfully added to the network by WPS function, the WPS LED will keep
on for about 5 minutes and then turn off.
2) When press and hold the WPS/Reset button for more than 5 seconds, you will reset the
router.