Binatone WR3000N, Руководство пользователя

Страница: 58 / 112

WR3000N 300M Wireless N Router
- 52 -
4.8 Forwarding
Figure 4-30 The Forwarding menu
There are four submenus under the Forwarding menu (shown in Figure 4-30), Virtual Servers ,
Port Triggering , DMZ and UPnP . Click any of them, and you will be able to configure the
corresponding function.
4.8.1 Virtual Servers
Choose menu “ Forwarding → Virtual Servers ”, you can view and add virtual servers in the
screen as shown in Figure 4-31. Virtual servers can be used for setting up public services on your
LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all requests
from the Internet to this service port will be redirected to the computer specified by the server IP.
Any PC that was used for a virtual server must have a static or reserved IP Address because its IP
Address may be changed when using the DHCP function.
Figure 4-31
Virtual Servers
¾
Service Port - The numbers of External Ports. You can type a service port or a range of
service ports (in XXX – YYY format, XXX is the start port number, YYY is the end port
number).
¾
IP Address - The IP Address of the PC providing the service application.
¾
Protocol - The protocol used for this application, either TCP , UDP , or All (all protocols
supported by the Router).
¾
Status - The status of this entry, either Enabled or Disabled .
To setup a virtual server entry:
1. Click the Add New… button, the next screen will pop-up as shown in Figure 4-32.