24
Personalising your Handset / DECT Settings
9.2.5 Enable or Disable Dial-Pad Touch Tones
This option lets you enable or disable the playing of touch tones on your handset
when using the dial pad.
1. From the Home screen, tap
.
2. Tap
Settings
>
Audio Profiles
>
General
> >
Dial pad touch tones
.
3. A
will appear next to the option to indicate that touch tones are enabled.
4. To disable, tap
Dial pad touch tones
again.
9.2.6 Enable or Disable Touch Sounds
This option lets you enable or disable the playing of sounds on your handset when
making a screen selection.
1. From the Home screen, tap
.
2. Tap
Settings
>
Audio Profiles
>
General
> >
Touch sounds.
3. A
will appear next to the option to indicate that touch sounds are on.
4. To disable, tap
Touch sounds
again.
10 deCT seTTInGs
10.1 Register Handset to base
Your handset needs to be registered to the base station before it can be used.
Note
: Your Smart 66 Handset is pre-registered to the Base and should not need to be
registered again. Handset registration is only necessary if you buy extra handsets or
if a handset becomes faulty.
1. Press and hold the
Register button
on the base for at least 5 seconds.
2. On the handset screen tap
>
Settings
>
DECT manager
>
Handset
Registration
>
OK
.
•
The handset will begin searching for the base station.
•
If successful, “Handset registration done!” is displayed and the handset
number will appear on the status bar instead of NA.
10.2 Delete All Handset Registrations
You can de-register all handset registrations from the base unit.
1 Unplug the micro-USB plug of the power adapter from the base.
2 Press and hold the
Paging/Register
button of the base then reconnect the
micro-USB plug of the power adapter with the base.
3 Keep on pressing and holding the
Paging/Register
button for 40 seconds.