Binatone iDECT Q2i System, Руководство пользователя

Страница: 9 / 33

6
3.2
Base Station with Telephone Answering Machine (TAM) Control
1
4
5
6
7
9
8
10
11
3
2
CHARGE IN USE VOL
12
1. PAGE
Press the Page on the base station to page your handset. It will ring for approximately 60 seconds.
2. CHARGING CRADLE
3. CHARGING LED
Steadily on while the handset is charging.
4. TAM ON/OFF
Press to turn on the answering machine.
Press again to turn off the answering machine.
5. PLAY
Press to play the message. During message playback, press to stop the current message playback.
6. SKIP BACKWARD
Press to repeat playing the current message from the beginning. Press twice to skip backward to the previous message.
7. SKIP FORWARD
Press to skip the current message and play the next message
8. VOLUME UP (+)
Increase (+) speaker volume
9. VOLUME DOWN (-)
Decrease (-) speaker volume
10. DELETE
Press once to delete the message during playback
Press and hold to delete all the messages
Note: New voice messages will not be deleted.
11. 7-SEG LED DISPLAY
- - When answering machine is OFF
00 Steadily ON: No voice messages in TAM
XX Flash: There are XX new voice messages received where XX is from 01 to 59
Steadily ON: Playing the current XX incoming message
XX/FF Flashing XX alternatively with FF: There are XX new voice messages received where XX is from 01 to 59 and
the TAM memory is full
Flashing FF only: TAM is full and only old voice messages are kept in the TAM memory
- - /XX Flashing XX alternatively with - -: Time is not set and there are XX new voice messages received where XX is
from 01 to 59
Flashing – only: Time is not set and there are only old voice messages in the TAM memory.
YY Steadily ON: There are YY old voice messages (no new voice messages).
A1/A2 Steadily ON: Playing the current outgoing message (OGM) where A1, A2 are the OGM of Answer & Record
and Answer Only mode respectively.
XX/An Flashing XX alternatively with An: XX incoming message is now recording.
LA
Flashing: Remote access is in progress
LX Steadily ON: Indicate the current vo lume level where X is from 1 to 8
12.
IN USE LED
Steadily ON: During a call
Flashing: During ringing or new TAM message is received.