11
During a call:
Press <UP> or <DOWN> to increase or decrease the volume level respectively.
When you end the call, the volume settings w ill remain at the last selected level.
4.6
Mute a Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press <M ute/Left Soft key> to m ute the m icrophone. Your caller cannot hear you.
again to unmute the microphone.
Press <Unmute/Left soft key>
The current setting is shown.
4.7
Set the Silent Mode
In idle, press and hold <#> to turn off the ringer. The “RINGER OFF” icon is displayed on the LCD.
4.8
Redial
The last 20 numbers dialled are saved in the Redial list.
stored a name in
the phonebook
that matches the
number, the name will be displayed instead.
4.8.1 Redial a number from the redial list
1. Press <DOWN> to access the redial list.
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> to dial to the selected redial number.
Note: If there are no numbers in the redial list, the display shows
“
List Empty”
.
4.8.2 Save a redial number into the phonebook
1. Follow steps 1 and 2 in section 4.8.1
.
2. Press <Select> to select the redial number.
3. Press <Menu> and <UP/DOWN> to scroll to
Add to PB.
4. Press <Select> and then enter the name, edit the number if necessary and select the melody.
Note: Press <DOWN> after entering the name to go to next step of editing the number, and then
to scroll through the melody options. Name and number should be entered in order to save a new
phonebook entry.
5. Press <OK> to save the redial number into the phonebook.
4.8.3 Delete a redial number
1. Follow steps 1 and 2 in section 4.8.2
.
2. Press <Menu> and <UP/DOWN> to scroll to
Delete
.
3. Press <SELECT> and then<OK> to confirm the Delete.
4.8.4 Delete the entire redial list
1. Follow steps 1 and 2 in section 4.8.2
.
2. Press <Menu> and <UP/DOWN> to scroll to
Delete All
.
3. Press <SELECT> and then<Select> to confirm the Delete All.
press <DOWN> to go to the final step of selecting the melody. Press <RIGHT> or <LEFT>
4.9
Keypad Lock
You can lock the keypad so that it cannot be used accidentally while carrying it around.
1. To lock the keypad: In idle mode, press and hold <*> key, the <Keypad lock icon>will display.
2. To unlock the keypad: In idle mode, press and hold <*> key, the <keypad lock icon>
4.10
Find Handset
You can locate the handset by pressing <PAGE> on the base station. All the handsets
registered to the base will
ring up to 60 seconds and “
Paging
” is displayed on the LCD.
handset except <Silent / Right soft key> or pressing <PAGE> on the base.
You can stop the --Paging-- by pressing any key on the
If you have
will disappear.
