29
11
TROUBLESHOOTING
Problem Cause Solutions
No dialing tone when pressing <TALK
ON> key
a. The connection cord of the base
station is not plugged in.
b. The adapter cord is not plugged in
correctly in the base station.
c. The line is busy, as another
handset is used.
d. Wrong connection cord (no Euro
AS)
a. Check the connections. Unplug
and plug back in the mains.
Check that the telephone line cord
has been plugged into the base
station and the phone socket.
b. Check the base station plug and
the 220V plug (remove and plug-
in).
c. Wait until the line is unoccupied.
d. Use the original connection cord.
When connect to a PBX, no and/or
wrong connection after dialing.
Dialing prefix is needed.
Insert the dialing prefix
"Searching"
is displayed.
Base station out of range.
Base station not connected to mains.
Reduce the range.
Connect base station to mains.
The call does not work.
Service not activated or wrong
operator or wrong setting
Check your Subscription with network
or change the dial mode.
No display.
Empty battery
Recharge battery
If you have difficulty with your phone, please try the suggestions listed below.
Please contact the technical support of the network provider for further information.
This telephone is not equipped with a grounding function! Therefore some of the functions
may be limited when used in PBX systems.
Technical Support
Please read out the serial number of this telephone to Help Line.
The serial number can be found in the battery compartment after having the batteries removed.
For technical support, call Binatone Help Line Customer Service at 0845 345 9677.
CONFORMITY
This unit conforms to the following rules and regulations:
1995/5/EC Radio frequency and telecommunication equipment and the mutual acceptance of
conformity. The CE mark proves the above.
Waste electrical products must not be
disposed of with household waste.
This equipment should be taken to
your local recycling centre for safe
treatment.
