Billion BIPAC 6600 Broadband Firewall Router
46
Click here
to reveal
more.
4. On the top, the “Host Name” and “DNS server” of the computer are configured to call when it
is looking for a named resource. The default gateway is the server through which the client
connects to the Internet. The DHCP Server identifies the network server (i.e. BIPAC 6600)
that assigns IP addresses to computers on the network.
If the product is working properly, the following should be apparent from this screen:
1)
The Client should have an IP address within the prescribed range.
2)
The “DHCP” and “Default Gateway” should list the product’s local port address (the
device’s IP address).
3)
The DNS server IP addresses should match the DNS server IP addresses set in the
device.
IPCONFIG.EXE
For WinNT, Win2000 and WinXP, go to
Start
Programs
Accessories
Command
Prompt
to open the Command Prompt. Type in
IPCONFIG /ALL
and hit “Enter” to see the
adapter’s information. Type in
IPCONFIG /RELEASE
to release all adapters’ IP address and
IPCONFIG /RENEW
to renew IP addresses. For a list of the
IPCONFIG
commands, type in
IPCONFIG /? .
How can I test the whole path (PC
←→
Router
←→
outside world) to make sure it works
fine?
There is a simple tool named PING. Send this command to desired IP station and should be
immediately echoed back. Therefore it acts as a loop back. If you can receive the echo back
successfully, the path is OK.
Содержание BIPAC 6600
Страница 1: ...BIPAC 6600 Broadband Firewall Router User Manual ...
Страница 2: ......
Страница 46: ...Billion BIPAC 6600 Broadband Firewall Router 42 ...
