Billion BIPAC 6600, Руководство пользователя

Страница: 26 / 54

Billion BIPAC 6600 Broadband Firewall Router
22
IP Address: Default at 192.168.1.254 .
This is the device IP address in LAN site. If you plan to change it to another IP address to a
different range of IP subnet. Please make sure your PC is also located at the same IP subnet.
Otherwise, you may not be able to access the router.
Subnet Mask: Default at 255.255.255.0.
3.4.3.1.2 DHCP Server
DHCP Server: Check DHCP Server “ Enable ” to allow the router distributes IP Addresses,
subnet mask and DNS setting to computers. The following fields will be activated. If you check
“
Disable ”, remember to specify a static IP address, subnet Mask, and DNS setting for each of
your local computers. Be careful not to assign the same IP address to different computers.
Range Start: Enter the start address of this local IP network address pool. The pool is a piece
of continuous IP address segment. The default value is 192.168.1.100.
Range End: Enter the last address of this local IP network address pool that you want the
DHCP server to assign IP addresses to. The default value is 192.168.1.199.
With this case, the DHCP pool is from 192.168.1.100 to 192.168.1.199. Therefore, the local
computer will get an IP address located at this range randomly.
Lease Time: Set the lease time you required.