60
System
Here are the items within the System section:
Time Zone, Remote Access, Firmware Upgrade,
Backup/Restore, Restart
and
User Management.
Time Zone
The router does not have a real time clock on board; instead, it uses the Simple Network Time
Protocol (SNTP) to get the current time from an SNTP server outside your network. Choose your
local time zone, click Enable and click the Apply button. After a successful connection to the Internet,
the router will retrieve the correct local time from the SNTP server you have specified. If you prefer
to specify an SNTP server other than those in the list, simply enter its IP address as shown above.
Your ISP may provide an SNTP server for you to use.
Daylight Saving is also known as Summer Time Period. Many places in the world adapt it during
summer time to move one hour of daylight from morning to the evening in local standard time. Check
Enable checkbox to set your local time.
Resync Period (in minutes) is the periodic interval the router will wait before it re-synchronizes the
router’s time with that of the specified SNTP server. In order to avoid unnecessarily increasing the
load on your specified SNTP server you should keep the poll interval as high as possible – at the
absolute minimum every few hours or even days.
Содержание BiPAC 6404VGP R3
Страница 49: ...47 Step 7 WPS set up complete And you have set up security enabled Wi Fi networks...
Страница 51: ...49 Step 3 Enter the AP SSID and apply Next button Step 4 Enter the Passphrase and apply Next button...
Страница 52: ...50 Step 5 WCN set up complete And you have set up security enabled Wi Fi networks...
Страница 54: ...52 Step 4 New WPS device have join into the wireless network...