18
Factory Default Settings
Before configuring your router, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
The default username and password are “
admin
” and “
admin
” respectively.
Device LAN IP settings
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE
DHCP server
DHCP server is enabled.
Start IP Address: 192.168.1.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown in
the table.
LAN Port
WAN Port
IP address
192.168.1.254
Subnet Mask
255.255.255.0
DHCP server function
Enabled in ports 1, 2, 3 and
4
IP addresses for distribution
to PCs
100 IP addresses continuing
from 192.168.1.100 through
192.168.1.199
The PPPoE function is
enabled
to automatically get
the WAN port configuration
from the ISP.
Содержание BiPAC 6404VGP R3
Страница 49: ...47 Step 7 WPS set up complete And you have set up security enabled Wi Fi networks...
Страница 51: ...49 Step 3 Enter the AP SSID and apply Next button Step 4 Enter the Passphrase and apply Next button...
Страница 52: ...50 Step 5 WCN set up complete And you have set up security enabled Wi Fi networks...
Страница 54: ...52 Step 4 New WPS device have join into the wireless network...