Bilancial BTEK DD 700, Руководство для продвинутых пользователей

Страница: 30 / 91

30
ADVANCED USE MANUAL DD700
2.4.9 Tare transmission request
XT<CR> (XTb<CR>)
The terminal responds with the following string:
n<SP><um><SP>TE<CR><LF>
if the tare has been set manually;
n<SP><um><SP>TR<CR><LF>
if the tare has been acquired.
n = 9 characters.
2.4.10 Scale status transmission request
XZ<CR> (XZb<CR>)
The terminal responds with the following string:
<s1><s2><s3><s4><CR><LF>
Characters such as s1, s2, s3 and s4 are ASCII characters that must be interpreted as expressed in
hexadecimals. Each character represents 4 bits with different meanings, for example incoming ASCII
character "A" must be interpreted as hexadecimal digit "A";
1
0 1 bit3 0 bit0
bit2 bit1
When a bit has a value of "1" this means that the corresponding signal is in true condition; the
meaning of the signals is as follows:
<s1> bit 0 minimum weighing operation signal
bit 1 blocked tare signal
bit 2 preset(1)/self-weighing(0) tare signal
bit 3 "center zero" signal
<s2> bit 0 LSB weighing extension signal (only
ME)
bit 1 stable weight signal
bit 2 overload signal
bit 3 MSB weighing extension signal (only
ME)
<s3> bit 0 entered tare signal
bit 1 deleted blocked tare signal (only
ME)
bit 2 invalid weight
bit 3 printing in progress
<s4> bit 0 approved instrument
bit 1 failed converter
bit 2 error on scale configuration parameters
bit 3 not used