Bilanciai BTEK BS-FECD-P-CPD-M, Руководство по установке

Страница: 8 / 26

www.B-TEK.com
2016
Pit Type Truck Scale Installation Manual
8
Installation
Prior to installation of the scale it is important to have the proper tools and equipment. The following is a sug -
gested list :
Layout the foundation base plate locations using the foundation drawing specific to the scale’s installation.
Snap chalk lines to mark the center locations of all load cell foundation base plates.
Note that all center lines
should be measured from center of foundation.
The foundation base plates have the width and length
centers marked with a punch.
• Foundation drawings
• 4-way lifting chains with of 15’ - 20’
lengths to each corner
• 100’ measuring tape
• Chalk line
• Laser level and/or transit
• Hydraulic jack(s)
• Dummy load cells
• Various size wrenches and sockets
(13mm, 9/16”, 3/4”, 1-1/8”, 1-5/16” and 1-7/8”)
• Pry bars
• Hand tools for working with cables / wires
• Level(s)
Foundation Base Plate Layout
Verify that the foundation dimensions are correct and accurate, specifically the distance between end walls and
the vertical height from slab / pier to top of approach.
The foundation must be square. Verify by marking centerlines of both the length and width of foundation with a
chalk line. Use the foundation drawing supplied for reference. All measurements should be taken off of these
centerlines.