Bilanciai BTEK BS-FECD-P-CPD-M, Руководство по установке

Страница: 4 / 26

www.B-TEK.com
2016
Pit Type Truck Scale Installation Manual
4
Introduction
This manual is meant as an installation guide for the B-TEK Pit Type series of full
electronic motor truck scales. This includes the following models:
BS-FESD-P-CPR-M
BS-FESD-P-CPD-M
BS-FECD-P-CPR-M
BS-FECD-P-CPD-M
The Pit Type series of flat top truck scales are available in standard lengths from 10’ to 120’, and varying
widths from 8’ to 13’. Depending on how it was ordered, the individual scale modules can arrive from the
factory partially or fully assembled. This manual attempts to cover all instances.
All models fall under the NTEP certificate of conformance number 97-116A1.
No physical or electrical changes / alterations may be made to the scale during installation, which may void the
warranty. This includes removal, addition or modification of any steel or components, as well as electrical or
program related items.
Check with the local Weights and Measurements authority prior to installation to verify that the foundation
meets all requirements, including those of the National Institute of Standards and Technology (NIST) and spe -
cifically Handbook 44.
Prior to installation it is the customer’s responsibility to verify that the equipment meets the requirements of
the application. Do not begin installation if this is unknown. It is the customer’s responsibility to ensure that the
scale equipment is operated within the manufacturer’s specifications.
Any repairs must be performed by B-TEK Scales authorized service technicians.
Failure to comply with this policy voids all implied and/or written warranties.
General safety warnings are as follows:
• The scale is designed for vehicular traffic only, do not allow any pedestrian traffic on the scale
• Do not get out of your vehicle while on the scale
• Keep all hands, feet and clothing away from moving parts
• Do not exceed the specified load limit for the scale
• Do not use the scale for any other purpose than weight measurement
• Use caution when removing snow or other debris from scale deck or beneath the scale modules