Bike-Lift M516-001, Руководство по эксплуатации и обслуживанию

Страница: 34 / 50

Operating manual number
057-2-6-0001-R0
Page 34
Version 2021
EN
8.4.3 Cleaning the work areas
Keep the work area clear of any material which may hinder the operations of the employees.
Keep the surrounding areas clean; in particular from oil, grease,
etc., which can make the floor
slippery.
Use suitable vacuum cleaners and proper equipment.
8.5 Problems and remedies
The most common problems encountered during the work, the probable causes which
determine them and the possible remedies to be taken to eliminate them are listed below.
When implementing the suggested remedy, always follow the instructions described in the
Instructions to which the remedy refers.
Bike-Lift Europe s.r.l. will solve all the problems which cannot be eliminated by means of the
attached instructions.
The motor housing (Figure 13) which activates and moves the platform is placed at the base
of the piston.
The foot and air pumps are, on the other hand, external and for their maintenance refer to
the intended Manual.
Figure 13 – electric motor